RIUKAI TECHNOLOGY has 25 years of experience in the field of environmental testing equipment testing to meet the needs of our customers.
Thermal Shock Chambers
Why Opt for 2/3 Zones Thermal Shock Chambers?
About MIL-STD-810 Method 503. Method 503 is a temperature shock test that simulates the transition from a hot environment to a cold environment very rapidly.
Thermal shock testing, also known as temperature shock testing or temperature cycling, exposes a product to alternating low and high air temperatures to accelerate failures caused by repeated temperature changes under normal conditions of use.
Cold and Hot thermal shock test chambers are a method of alternately applying extremely hot and cold air to a product to test its durability and determine the point of fracture. This method reduces the likelihood of failure.
RIUKAI manufactures industry-leading thermal shock test chambers that help companies ensure their products can withstand rapid temperature changes.Commonly used in the automotive, aerospace and defense industries for testing electronic components, the RIUKAI range of chambers not only delivers innovation, but also peace of mind for businesses and consumers.
Thermal shock test chambers are just one of the climatic environment test chambers we offer, our factory also provides climatic environment testing equipment.
Have a question about thermal shock and temperature laboratory testing? Contact us or call and we will determine the best course of action.Each Thermal Shock Chambers in the RIUKAI Series is optimized to give you the maximum benefit of 2/3 Zones Thermal Shock Tests. Click here for more information.
Thermal Shock Chambers – Testing Products Between Temperature Extremes
Thermal shock test chambers are designed for quick transitions between Cold and Hot temperature zones. These chambers are available in vertical and horizontal configurations, with two or three zones. The difference lies in the test method and internal construction.
The two-zone cold and hot thermal shock test is divided into a high-temperature zone and a low-temperature zone. The three-zone cold and hot thermal shock test is divided into a high temperature zones, a low temperature zones and a test area.
Advantages of RIUKAI Thermal Shock Chambers
2 Zones Type Thermal Shock Chambers are configured vertically:
Steps to defrost once after 500 cycles: this saves a lot of test time (other chambers may need defrosting every 10-100 cycles for performance).
3 Zones Type Thermal Shock Chambers vertical configuration:
Steps to defrost once after 300 cycles: this saves a lot of test time and more energy (other chambers may need to be defrosted every 10-100 cycles for performance).
Thermal shock test chambers are used in all industries to help detect product defects in electronic components and product assemblies. You can click to view the thermal shock test chambers we have for sale below, or contact us directly for pricing and other information on thermal shock test chambers. Welcome to inquire !
Thermal Shock Test Chamber Test Standards
MIL-STD 202 Method 107 Thermal Shock Test
MIL-STD 750 Method 1056 Thermal Shock (liquid to liquid)
MIL-STD 750 Method 1051 Shock
MIL-STD-883 Method 1011 Thermal Shock Test
EIA-364-32 Thermal Shock and Temperature Cycling
IEC 60068-2-14 Temperature Testing
Category
Related Articles
Solution
Environmental Tests For Electric And Electronic Products – Part 2: Test Methods, Test m: Low Pressure
1. Introduction 1.1 scope This part is applicable to low pressure test at room temperature. The purpose of this test is to determine the adaptability of components, equipment or other…
LCD Display Reliability Environment Test
1. High temperature work Reference standard: GB / t2423.2-2001 Instruments / tools used: constant temperature and humidity test chamber Test conditions and methods: put the qualified test sample into the…
Frequently Asked Question
A:RIUKAI has 25 years of experience in the industry. We can undertake the manufacturing and ODM cooperation of various large-scale non-standard environmental test equipment and provide environmental reliability test solutions.
A:Payment shall be made y T/T, L/C, or D/P, etc. We can communicate and negotiate.
A:Each machine will be debugged before shipment and shipped after debugging is completed. We will provide very specific operation manual and operation video, and also provide online remote video conference to guide the operation. We can provide on-site installation and training services abroad if customers require.
A:Generally, it takes about 20-30 days, and if we have it in stock, we can arrange delivery within 7 days. Please note that our production lead time depends on the number of items.
A: We provide various types of trade terms, such as EXW, CIF, DDU, DDP, etc.
English 
Russian